Henan Bochuang Machinery Equipment Manufacturing Co., Ltd.
Main products:Cement equipment,Gas concrete equipment,Mining equipment,Crushing equipment,Sand equipment
Products
Contact Us
  • Contact Person : Ms. Bai Jenny
  • Company Name : Henan Bochuang Machinery Equipment Manufacturing Co., Ltd.
  • Tel : 86-371-86638099
  • Fax : 86-371-86638236
  • Address : Henan,Zhengzhou,Dali Village, Xiliuhu Management Office, East Section of Zhengshang Road, Zhongyuan District, Zhengzhou City
  • Country/Region : China
  • Zip : 450000

aac cutting machine

aac cutting machine
Product Detailed
aac cutting machine 1.Provide on-site guidance with free 2.light weight,low cost,high profit 3.Supply whole set of equipment

aac cutting machine

Brief Introduction of aac cutting machine

AAC Block Cutting machine is the main equipment in the production of aerated concrete with annual output of more than 50,000m3, and the key equipment. It's absolutely necessary for promoting the output and quality. JQF cutting machine series, which our factory produces, can accomplish six-side cutting in one step. Because of its advanced technology, there is no need for secondary crane, which reduces the abrasion of body blank arising from multiple cranes. Therefore, the products are very marketable across the country, and are well accepted by the customers. Through constant technical reformation, our factory has developed aerated concrete cutting machine of various types.

 Main Features of aac cutting machine

1.The structure of the machine is simple and practical , it is easy to install and maintain.

2.After overturning, the blank stands vertically with the width of 60mm and the height of 1200mm,thus the cutting wire can be shorter and it is not easy to be broken and drifted, the cutting precision can be more exactly as well.

3. As the blank stands vertically ,the grooves on both sides of the blank (with width of 600mm )can be milled at the same time when the blank is cut vertically ,no groove processing device is needed;

 4.The machine can produce both building blocks and slabs and the blank can be cut into six sides , therefore the quality of products can not be influenced by the mould oil and the deformation of the mould;

5. The machine is easy to operate. The cutting process of the machine (overturning , vertical cutting and cross cutting ) can be finished in different positions and the cutting and running are controlled by the same device, therefore the operation is simplified and the maintenance is convenient.

 

Main technical data of aac cutting machine

NO.

Size

Rough Before Cutting

(mm)

Cutting Cycle

Cutting Ability

(m3/year)

Cutting Precision

(mm)

Total Power

(kw)

Dimension (mm)

1

4m

4050×1240×650

6min/Block

Above 100,000

Six-side Cutting<±2

34

13800×4200×5600

2

4.2m

4250×1240×650

6min/Block

Above 200,000

Six-side Cutting<±2

34

13800×4950×5870

3

6m

6050×1540×650

6min/Block

Above 200,000

Six-side Cutting<±2

37

17500×4600×6000

aac plant, the potential industry in the whole world in the near future. 

Our company can supply the whole production line equipments for the annual output 20000cbm3---300000cbm3, give the professional advice and provide the technical support for free according to clients' different requirements. We will be your strong support.

Raw material

fly ash,slag,lime,cinder, gangue,aluminum powder etc.

Fly ash style aerated block raw material proportion:

Parameter Name

Parameter Value

Fly ash

65-70%

cement

6-15%

lime

18-25%

gypsum

3-5%

Aluminum powder paste

8

Water & material rate

0.60-0.65

Casting temperature

36-40°C

Aluminum mixing time

30-40s

Sand style aerated block raw material proportion

Parameter Name

Parameter Value

Sand

55-65%

Cement

10-20%

Lime

20-30%

Gypsum

2-3%

Aluminum powder paste

8

Water & material rate

0.65-0.75

Casting temperature

35-38°C

Aluminum mixing time

30-40s

The advantage of aac block

aerated concrete block is a kind of new building material, and has theadvantages of environmental protection. Compared with the traditional claybrick,as follows;

1.light weight

Aerated concrete density is 400kg / m3 ~ 700kg / m3, equivalent to the 1 /3 of hollow clay brick, solid clay brick is 1 / 5, 1 / 4 concrete, lightweightaggregate concrete is lower than average density.

2.insulation resistance

Aerated concrete block internal contain great amount of bubbles and pores,and has good heat preservation performance.

3.durability

most of the aerated concrete block in natural carbonation,strength wasincreased slightly

4.resistance to water penetration

Aerated concrete block with closed independent globular structure, thusabsorbing moisture slowly.

5.easy of process

Aerated concrete block not only product a variety of specifications withinthe factory , can also be used for sawing, planing, drill, nail.

6.compressive strength

Aerated concrete compressive strength for 3.5MPa, 07 for 5.0MPa.

7.fire resistance

Aerated concrete block: low thermal conductivity, heat transfer is slow,can effectively resist fire, and to protect the structure from the effects offire.

8.sound absorption

Aeratedconcrete block has a spherical closed porous structure, and thus a certainsound absorption, sound absorption coefficient is 0.2 ~ 0.3.

The size of aac block

Length(mm)

Height(mm)

Width(mm)

600

 

200

 

250

 

300

60

 

120

 

180

 

240

75

 

100

 

125

 

150

 

Technological process

(1) all kinds of raw materials storage bin→ (2) measuring and batching → (3) mixing raw material with water → (4) prepared mould (5) → pouring → (6) vesicant and static curing → (7) demoulding → ( 8) rolling-over: horizontal cutting, vertical cutting → (9) be grouped into the autoclaved kettle → (10) high temperature and high pressure conservation → (11) out of autoclaved kettle for finished product → (12) testing finished product → (13)packaging → (14) stacking storage → (15) out of factory

We can supply our customer for designning, production, installation, commissioning, training and good after-sale service.

Capacity: from 20000 cubic meter to 300,000 cubic meters per year.

 

We have many Chinese customers and have a few foreign customers with rich experience. We can make the equipment configuration, give the professional advice and provide the technical support according to clients' different requirements. If you want to invest a potential industry and get more profit, aac plant is a best choice for you. Earlier you start, more profit you will get. Our company can be your strong support.

Contact person: Jenny

Director of International Trade Depatment

Henan Bochuang Machinery Equipment Manufacturer Co.,Ltd

Tel:+86-371-86638236     +86-15838150898

Fax: +86-371-86638233

Skype: gybaige 

aac cutting machine



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.