Henan Bochuang Machinery Equipment Manufacturing Co., Ltd.
Main products:Cement equipment,Gas concrete equipment,Mining equipment,Crushing equipment,Sand equipment
Products
Contact Us
  • Contact Person : Ms. Bai Jenny
  • Company Name : Henan Bochuang Machinery Equipment Manufacturing Co., Ltd.
  • Tel : 86-371-86638099
  • Fax : 86-371-86638236
  • Address : Henan,Zhengzhou,Dali Village, Xiliuhu Management Office, East Section of Zhengshang Road, Zhongyuan District, Zhengzhou City
  • Country/Region : China
  • Zip : 450000

flyash aac production line

flyash aac production line
Product Detailed
Flyash aac production line 1.raw material is easy to get 2.light weight and low operated cost 3.professional manufacturer

Flyash aac production line

Advantages of our company: competitive price, professional manufacturer, rich experience, ISO9001:2008

Our company introduces advanced technology from abroad to manufacture aerated-concrete making equipments.These equipments can produce aerated blocks and slabs no more than 6 meters.According to their different cutting technologies,they can be devided into two kinds: Hydraulic turning-over cutting machine and airspring cutting machine.

Supplying fly ash aerated block and slab whole set equipments that are applicable to the annual output of 20 000 CBM to 300 000CBM;

Supplying sand areated block equipments and whole set equipments that are applicable to the annual output of 20 000CBM to 300 000CBM;

Supplying aerated concrete and block equipements as well as referencial program ,which that can be used for annual output of 15+15 thousand CBM.

The Development and Features of AAC:

AAC has a history of one hundred of years and has become the pillar industry in construction field. In our country aerated technique have been developed for about 40 years, and its technique skills and equipments are becoming mature. The AAC has the features of light bulk density, good thermal insulation properties and sound-absorption, certain strength and process ability, and its raw materials is very rich, especially the reuse of fly ash enables the comprehensive utilization of industrial residue, curb environmental pollution, no destroy on farmland, creat good social and economic benefits. AAC is a ideal alternative of the traditional clay brick wall materials. For many years AAC has been strongly supported by national wall reform policy, tax policy and environmental policy. In a sentence, AAC has been an important factor in new building materials and has a broad market prospect.

II.AAC Processing Technics:

1. Storing and supplying of raw materials of AAC blocks.All raw materials are carried into factory by trucks. Fly ash, sand or lime are gathered in specified raw materials field waiting for using. Sacks of cement and bulk cements stored in cement warehouse. Chemicals and aluminum powder are separately kept in chemical warehouse and aluminum warehouse. When used, these raw materials are carried into workshop respectively.

2.Processing of raw materials:

Quick lime is sent by vibrating feeder and belt conveyor into jaw crushers to smash. Smashed lime is sent into lime silo by bucket elevator and then is transported into ball mills by screw conveyer. Fined materials are sent into proportion bin by screw conveyer and bucket elevator.Aluminium powder is lifted by a truss motor to second layer of batch planta and empty into mixer.Then quota water is poured to make aluminium powder into suspension.

3.Aerated block Ingredients,Stiring and Casting

Fly ash (or sand or stone powder ) and waste slurry are measured in measuring tank. After the measuring and mould in their place, slurry stirring begins. Slurry temperature should reach about 40°-This is technical requirements. If the actual temperature doesn’t arrive 40°,vapor is used in the measuring tank to raise temperature. Half or one minutes before casting, aluminium suspension is supposed to be added to the slurry.

4,Pre-curing and Cutting Process

Cut model is conveyed to pre-curing room for gas forming. Room temperature should range from 50°to 70°.This period lasts one hour and a half to two hours. (If materials take on geographical advantages, this pre-curing can be eliminated). Pre-cured green body together with mould frame will be lifted to cutting station that is covered by autoclave board. After frame detachment, cutting machine do cross-cutting, vertical cutting, face-milling and tip-binding. At the same time, die grid is hanged to pre-curing cart for manual cleaning and degreasing to prepare for the next perfusion. The cutting ready embryo are carried to pre-curing cart together with die seat, palletizing in two tiers, four pillars between two the tiers, and get into grouping process.When the cutting of body is completed, partial waste materials cut down will be processed into waste material slurry which then will be pumped to the slurry tank located at the topmost story of batching building, after that, add the necessary raw material, then transported into a pulping machine for reuse.

5, Autoclave and End-products

After the green body is grouped, open autoclave door, a hoist will draw out autoclave cart; Put all green body on the cart and wind the cart back into the autoclave for steaming. Finished products will be carried by a bridge crane to a stockyard, then to a products dump by fork lorry load. The empty card together with autoclave bottom is lifted to return-line cart and winched back for another circle. 

We have many Chinese customers and have a few foreign customers with rich experience. We can make the equipment configuration, give the professional advice and provide the technical support according to clients' different requirements. If you want to invest a potential industry and get more profit, aac plant is a best choice for you. Earlier you start, more profit you will get. Our company can be your strong support.

Contact person: Jenny

Director of International Trade Depatment

Henan Bochuang Machinery Equipment Manufacturer Co.,Ltd

Tel:+86-371-86638236     +86-15838150898

Fax: +86-371-86638233

Skype: gybaige 

flyash aac production line



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.